How to Remove a Kitchen Island?

How to Remove a Kitchen Island?

Whether you are thinking about remodeling your old kitchen island or going to install a new one, the very first step you’d have to take in this regard is to remove the existing island. Undoubtedly, the island is nearly the biggest object in your kitchen so removing it will take plenty of time and effort. However, the good thing is this island demolition won’t take your hard-earned money as you don’t need to hire professionals for this cause.

Check this Out: Best Retro Microwave

Instead, all you need is an average toolbox, a little careful attitude, and a stepwise guide(leave it on us). So, just read the article to understand how to remove a kitchen island safely, without harming any appliance, cabinet, or power lines.

How to remove a kitchen island? 5 Easy Steps

Step 1: Clear the countertop

The very first thing you need to do for the island demolition is to clear it from whatever is present onto or around it. Some people use the kitchen island as a dining table because it has too much space on it to place pots and places and enough room around it to accommodate chairs. If you are also one of those people then you first need to remove the chairs around the island and clear the countertop from plates, pots, pans, or whatever it has.

Besides clearing the items onto and around the island, you also need to remove all the stuff your island’s cabinets and drawers are storing. Some people tend to fit in the microwave or dishwasher on the backside of the island so they should switch off the electric connection first and then move towards pulling the appliance out of the island. After removing the appliances from the fittings, unhook the electric wires tangling the island. Similarly, shit the gas off first before removing the gas stove otherwise you risk an oven explosion or a fire breakout.

Step 2: Remove the water fittings

Just like you have removed the electric wires around the island, you also need to remove the water connection if the kitchen sink is installed on the island. For this purpose, shut the valves for hot and cold water off and then dismantle the faucet. After this, remove the sink out of the unit by removing any fastener holding it in. Lastly, loosen and remove the water fittings completely with the help of a wrench.

As soon as you’d undo the drain fittings, some water may leak out of the lines so keep a rag within hand reach to wipe the spills off. Once you are done with removing the entire sink setting and drain fittings, clear the area from water lines, if you don’t want to install the new island in the same position.

Step 3: Remove the drawers and cabinets

Once you are done with step1, you can move towards drawers and cabinets. Since you already have removed all the stuff out of the drawers and cabinets, you can work on the island now freely. You might be thinking why you can’t move the island out of the kitchen when it has the drawers in? Well, doing so could be dangerous! While carrying the island out of the kitchen, the drawers could slip out. This, in turn, could damage the floor as well as break your foot.

In simple words, removing drawers from the island before repositioning will prevent the loose shelves and drawers from falling out. Similarly, the loose doors of your kitchen cabinets could open out during repositioning, causing inconvenience. Not only the inconvenience but on hitting the walls, both the walls and the cabinet’s doors can get damaged. So, it’s also wise to pull the drawers out and unscrew the cabinets beforehand.

Step 4: Remove the countertop

Now since you have removed the drawers, cabinets, appliances, and everything else of your kitchen island, it might have started to look more untidy and raw, having only the sides, base, and countertop. So, the next step in this demolition journey is to remove the countertop. Sometimes, the countertops are screwed in to hold them in their place while sometimes, the manufacturers glued the countertops to affix them to the sides.

In the former scenario, you can remove the countertop easily by removing the screws, and holding it together. While doing so, make sure to store all the hardware, like screws, hinges, etc., in a plastic bag so you can use the same items again while installing the new island. And if your countertop is glued in, you have to pry it off using either a crossbow or a chainsaw.

Step 5: Take the island apart

Some islands are secured to the kitchen floor while some others are made to be freestanding. So, if your kitchen island is secured, there must be some fasteners holding it in place. Thus, remove these fasteners or screws to free up your island from the floor. Once done, start taking the sides of the island apart.

It rarely happens that the sides are attached with screws but if that’s the case, you can put them apart easily by removing the screws. On the other hand, if the sides are sealed with glue or any other binding substance, the only thing that can help is a sharp-edged saw. While doing so, don’t forget to wear protective gear. Also, keep the children and pets away from the kitchen so they won’t harm themselves.

You don’t need to rush, just take your time and remove all the pieces side by side. Renting a dumpster would also be a wise decision because, at the end of demolition, your kitchen will end up with tons of debris, consisting of parts of flooring, cabinets, countertops, backsplash, etc. Your regular trash service won’t accept this waste so by renting a dumpster, you’ll never have to haul the trash all by yourself.

Post Comment